Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B830-100-R
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Overhung Load:||2,170||Shaft Seal Material:||Viton|
|Model Code:||B830||Ratio Range:||100:1 to 250:1|
|Center distance (inch):||3.00||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Diameter (in):||1.250 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Gear Drive Reductions:||Single||Output Shaft Assembly Code:||R|
|Service Factor:||1||No. of Gear Reductions:||Single|
|Series Style:||GR-B-R||Output HP:||0.367|
|Reducer:||Worm - Right Angle||Input RPM:||1,750|
|Output shaft:||Shaft||Output RPM:||17|
|Gear Type:||Worm||Output Shaft Orientation:||R|
|Assembly:||B-R||Output Key:||1/4 x 1.75|
|Housing material:||Cast Iron||Product Type:||Right Angle|
|Output Style:||R||Input HP:||0.603|
|Input Diameter (in):||0.875 in||Input Keyway:||3/16 X 1.63|
|Input Style:||Shaft||Mounting Style:||Base|
|Output Torque:||1321||Reducer Style:||Worm - Right Angle|