Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B830-50-R
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Series Style:||GR-B-R||Input RPM:||1,750|
|Mounting Style:||Base||Output Shaft Orientation:||R|
|Series Code:||GR||Reducer Style:||Worm - Right Angle|
|Input Style:||Shaft||Output HP:||1.383|
|Input HP:||1.915||Output RPM:||35|
|Output Torque:||2490||Output Key:||1/4 X 1.75|
|Overhung Load:||2,170||Series Type:||Cast Iron 800 Worm Gear Reducers|
|No. of Gear Reductions:||Single||Output Shaft Assembly Code:||R|
|Output Style:||R||Output Diameter (in):||1.250 in|
|Gear Type:||Worm||Housing material:||Cast Iron|
|Output shaft:||Shaft||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Shaft Seal Material:||Viton|
|Input Diameter (in):||0.875 in||Product Type:||Right Angle|
|Series:||GR Series - Ironman Worm Gear Reducers||Assembly:||B-R|
|Model Code:||B830||Ratio Range:||50:1|
|Service Factor:||1||Input Keyway:||3/16 X 1.63|
|Ratio:||50:1||Gear Drive Reductions:||Single|
|Center distance (inch):||3.00|