Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B830-15-R
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Input RPM:||1,750||Output Shaft Assembly Code:||R|
|Output Shaft Orientation:||R||Overhung Load:||2,170|
|Series Style:||GR-B-R||Output Style:||R|
|Output RPM:||116||Input Style:||Shaft|
|Series Code:||GR||Mounting Style:||Base|
|Output HP:||4.311||Reducer Style:||Worm - Right Angle|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Torque:||2329|
|Output Key:||1/4 X 1.75||Input HP:||4.843|
|No. of Gear Reductions:||Single||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Diameter (in):||0.875 in||Service Factor:||1|
|Product Type:||Right Angle||Assembly:||B-R|
|Input Keyway:||3/16 X 1.63||Model Code:||B830|
|Ratio Range:||15:1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Output shaft:||Shaft|
|Center distance (inch):||3.00||Shaft Seal Material:||Viton|
|Housing material:||Cast Iron||Output Diameter (in):||1.250 in|
|Gear Drive Reductions:||Single||Ratio:||15:1|