Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B830-30-L
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38||Packaged Width:||15.13|
|Output RPM:||58||Output HP:||2.332|
|Output Style:||L||Output Key:||1/4 X 1.75|
|Series Code:||GR||Output Torque:||2519|
|Reducer Style:||Worm - Right Angle||Mounting Style:||Base|
|Input HP:||2.879||Input RPM:||1,750|
|Output Shaft Assembly Code:||L||Input Style:||Shaft|
|No. of Gear Reductions:||Single||Series Style:||GR-B-L|
|Output Shaft Orientation:||L||Overhung Load:||2,170|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Reducer:||Worm - Right Angle|
|Gear Type:||Worm||Housing material:||Cast Iron|
|Center distance (inch):||3.00||Shaft Seal Material:||Viton|
|Model Code:||B830||Input Diameter (in):||0.875 in|
|Assembly:||B-L||Input Keyway:||3/16 X 1.63|
|Product Type:||Right Angle||Gear Drive Reductions:||Single|
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio:||30:1|
|Output shaft:||Shaft||Service Factor:||1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Diameter (in):||1.250 in|