Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B830-20-L
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||19.38 Inches||Packaged Width:||15.13 Inches|
|Packaged Height:||15 Inches|
|Output HP:||3.407||Input Style:||Shaft|
|Output Shaft Orientation:||L||Output RPM:||87|
|Series Style:||GR-B-L||Input HP:||3.947|
|Input RPM:||1,750||Mounting Style:||Base|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Series Code:||GR|
|Output Torque:||2454||Output Key:||1/4 X 1.75|
|No. of Gear Reductions:||Single||Overhung Load:||2,170|
|Output Shaft Assembly Code:||L||Output Style:||L|
|Reducer Style:||Worm - Right Angle||Ratio:||20:1|
|Model Code:||B830||Service Factor:||1|
|Output Diameter (in):||1.250 in||Ratio Range:||20:1|
|Reducer:||Worm - Right Angle||Input Keyway:||3/16 X 1.63|
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Drive Reductions:||Single|
|Housing material:||Cast Iron||Output shaft:||Shaft|
|Shaft Seal Material:||Viton||Center distance (inch):||3.00|
|Product Type:||Right Angle||Input Diameter (in):||0.875 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers|