Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-20-H1-180-20
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Model Code:||HMQ826||Output Style:||H1|
|Input Keyway (C Face):||1/4 x 1/8||Input HP:||2.965|
|No. of Gear Reductions:||Single||Output RPM:||87|
|Gear Type:||Worm||Input Diameter (in):||1.125 in|
|Reducer:||Worm - Right Angle||Output Hollow Shaft Diameter (in):||1.250 in|
|Input Bore (C Face):||1.125||Gear Drive Reductions:||Single|
|Series:||GR Series - Ironman Worm Gear Reducers||Mounting Style:||Shaft Mount|
|Frame Size:||180||Output Key:||1/4 X 2.50|
|Shaft Seal Material:||Viton||Output Shaft Assembly Code:||H1|
|Overhung Load:||1,625||Output HP:||2.549|
|Series Style:||GR-HMQ-H1||Output shaft:||Hollow Bore|
|Bore Code:||20||Product Type:||Right Angle|
|Output Shaft Orientation:||H1||Service Factor:||1|
|Center distance (inch):||2.63||Input RPM:||1,750|
|Input Style:||C-face Quill||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Housing material:||Cast Iron||Ratio Range:||20:1|
|Reducer Style:||Worm - Right Angle||Output Torque:||1836|