Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-7.5-H1-180-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Shaft Seal Material:||Viton||Overhung Load:||1,625|
|Product Type:||Right Angle||Reducer:||Worm - Right Angle|
|Mounting Style:||Shaft Mount||Ratio Range:||7.5:1|
|Center distance (inch):||2.63||Service Factor:||1|
|Input Diameter (in):||1.125 in||Input RPM:||1,750|
|Input HP:||4.956||Output Key:||3/8 x 3.00|
|Output Shaft Assembly Code:||H1||Output shaft:||Hollow Bore|
|Gear Type:||Worm||Reducer Style:||Worm - Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Hollow Shaft Diameter (in):||1.438 in|
|Frame Size:||180||Gear Drive Reductions:||Single|
|Output HP:||4.571||Model Code:||HMQ826|
|Output Shaft Orientation:||H1||Bore Code:||23|
|Output Style:||H1||Input Bore (C Face):||1.125|
|Input Style:||C-face Quill||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Keyway (C Face):||1/4 x 1/8||Series Style:||GR-HMQ-H1|
|Housing material:||Cast Iron||Output RPM:||233.3|
|No. of Gear Reductions:||Single||Ratio:||7.5:1|