Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-5-H1-180-16
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series:||GR Series - Ironman Worm Gear Reducers||Input RPM:||1,750|
|Frame Size:||180||Center distance (inch):||2.63|
|Series Style:||GR-HMQ-H1||Output Shaft Assembly Code:||H1|
|No. of Gear Reductions:||Single||Bore Code:||16|
|Ratio Range:||5:1||Output Hollow Shaft Diameter (in):||1.000 in|
|Reducer:||Worm - Right Angle||Output Shaft Orientation:||H1|
|Housing material:||Cast Iron||Output shaft:||Hollow Bore|
|Overhung Load:||1,625||Gear Type:||Worm|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Shaft Seal Material:||Viton|
|Assembly:||HMQ-H1||Gear Drive Reductions:||Single|
|Input Diameter (in):||1.125 in||Output RPM:||350|
|Reducer Style:||Worm - Right Angle||Ratio:||5:1|
|Output Key:||1/4 X 2.50||Service Factor:||1|
|Model Code:||HMQ826||Output HP:||6.276|
|Mounting Style:||Shaft Mount||Input Keyway (C Face):||1/4 x 1/8|
|Input Bore (C Face):||1.125||Output Style:||H1|
|Product Type:||Right Angle||Input Style:||C-face Quill|
|Input HP:||6.693||Output Torque:||1130|