Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-30-H1-140-23

Catalog #:GR-HMQ826-30-H1-140-23
Part #:GR8260567.23
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File size requires longer download time
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
The item requires a minimum order of {0} pieces.
The item requires a minimum order of {0} {1}.
The item must be ordered in multiplies of {0} pieces.
The item must be ordered in multiples of {0} {1}.
Weight:55.00 LB
List Price: $1,751.00

General Specifications

UPC: 690310017401 Weight: 55.00 LB
Packaged Length: 16 Inches Packaged Width: 12.25 Inches
Packaged Height: 11.75 Inches

Technical Specifications

Reducer Style: Worm - Right Angle Product Type: Right Angle
Product Line: GR Series - Ironman Worm Gear Reducers Series: GR Series - Ironman Worm Gear Reducers
Series Type: Cast Iron 800 Worm Gear Reducers Series Style: GR-HMQ-H1
Model Code: HMQ826 Series Code: GR
Gear Type: Worm Center distance (inch): 2.63
Reducer: Worm - Right Angle Ratio: 30:1
Input RPM: 1,750 Keyway: 3/16 X 3/32
Output Key: 3/8 x 3.00 Frame Size: 140
Output HP: 1.743 Input HP: 2.145
Input Style: C-face Quill Output RPM: 58
Nominal Motor HP Rating to HP @ 1750 RPM: 2 Mounting Style: Shaft Mount
Output Style: H1 Bore Code: 23
Output Shaft Assembly Code: H1 Output Shaft Orientation: H1
Output Torque: 1883 Output Hollow Shaft Diameter (in): 1.438 in
Input Bore (C Face): 0.875 Input Keyway: 3/16 X 1.63
Input Quill Diameter (in): 0.875 in Input Diameter (in): 0.875 in
Motor HP Rating: 2 Ratio Range: 30:1
No. of Gear Reductions: Single Gear Drive Reductions: Single
Input Keyway (C Face): 3/16 x 3/32 Shaft Seal Material: Viton
Assembly: HMQ-H1 Housing material: Cast Iron
Output shaft: Hollow Bore Service Factor: 1
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
New password and confirm password do not match.
The password entered does not comply with our password policy. Please try again.
The password entered does not comply with our password policy. Please try again.
You have already access to entered account.
Account already added
Please select an account
The entered account number is not valid or the account is not yet transitioned for use at
You must provide a valid account number to be added. Please contact your Sales Representative or Account Administrator if you don’t know your Account Number.
Please select Additional Access checkbox.
Please enter your address.
Please enter your address cont.
Please check to agree with Terms of Use and Privacy Policy.
Please enter your city.
Please enter your company name.
Please enter confirm password.
Please select your country.
Please enter a valid format for your email address.
Please enter your email address.
Please enter your first name.
Please review and select a warehouse for Catalog/Part Numbers: {0}
Please enter your job title.
Please enter your last name.
The current password entered does not match your password or new password is the same like one of the previous or password changed last 30 days.
Profile updated successfully.
Error while request access.
Registration Information has been received.   Thank you for your interest in Regal.
Please enter new password.
Please enter old password.
Please enter a valid format for your phone number.
Please enter your phone number.
Please enter a valid format for your extension.
Please select at least one product category.
Please verify you are not a robot.
Registration Information has been received.   Thank you for your interest in Regal.
You must provide the name of a Regal Beloit employee who can confirm your need for access to Genteq technical documents.
Please select your state.
This email is already in use. Please log in.
Please enter your zip code.
Your session has timed out. You must log in again to access secure content. Any work on the current page will be lost.
This item is discontinued, but you may order against the remaining inventory. You have requested {4} items of the total remaining quantity of {2}.
The following items have been added to your cart: {0}