Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-30-H1-140-18
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer:||Worm - Right Angle||Input HP:||2.145|
|Input Diameter (in):||0.875 in||Assembly:||HMQ-H1|
|Output Shaft Orientation:||H1||Model Code:||HMQ826|
|Ratio:||30:1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series Style:||GR-HMQ-H1||Input Style:||C-face Quill|
|Housing material:||Cast Iron||Output shaft:||Hollow Bore|
|Input Bore (C Face):||0.875||Output Style:||H1|
|Gear Drive Reductions:||Single||Series:||GR Series - Ironman Worm Gear Reducers|
|Output Shaft Assembly Code:||H1||Shaft Seal Material:||Viton|
|Service Factor:||1||Gear Type:||Worm|
|Bore Code:||18||Output Key:||1/4 x 3.00|
|No. of Gear Reductions:||Single||Mounting Style:||Shaft Mount|
|Frame Size:||140||Center distance (inch):||2.63|
|Ratio Range:||30:1||Output HP:||1.743|
|Output Torque:||1883||Output Hollow Shaft Diameter (in):||1.125 in|
|Input Keyway (C Face):||3/16 x 3/32||Output RPM:||58|
|Reducer Style:||Worm - Right Angle||Product Type:||Right Angle|