Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-40-H1-56-18
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Bore Code:||18||Mounting Style:||Shaft Mount|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Input RPM:||1,750|
|Input Style:||C-face Quill||Frame Size:||56|
|Output Style:||H1||Input HP:||1.695|
|Output RPM:||43||Series Style:||GR-HMQ-H1|
|Output Torque:||1854||Output HP:||1.287|
|Output Key:||1/4 x 3.00||Output Shaft Assembly Code:||H1|
|Output Shaft Orientation:||H1||Keyway:||3/16 X 3/32|
|Series Code:||GR||Reducer Style:||Worm - Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||40:1|
|Input Quill Diameter (in):||0.625 in||No. of Gear Reductions:||Single|
|Model Code:||HMQ826||Gear Drive Reductions:||Single|
|Output shaft:||Hollow Bore||Input Keyway (C Face):||3/16 x 3/32|
|Reducer:||Worm - Right Angle||Output Hollow Shaft Diameter (in):||1.125 in|
|Center distance (inch):||2.63||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Diameter (in):||0.625 in||Service Factor:||1|
|Product Type:||Right Angle||Input Bore (C Face):||0.625|
|Shaft Seal Material:||Viton||Gear Type:||Worm|
|Housing material:||Cast Iron|