Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-25-H1-56-16

Catalog #:GR-HMQ826-25-H1-56-16
Part #:GR8260554.16
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:55 LB
UOM:EA
List Price: $1,700.00

General Specifications

UPC: 69031001680 Weight: 55 LB

Technical Specifications

Input RPM: 1,750 Output Key: 1/4 X 2.50
Output Hollow Shaft Diameter (in): 1.000 in Input Diameter (in): 0.625 in
Output Style: H1 Gear Drive Reductions: Single
Input Keyway (C Face): 3/16 x 3/32 Ratio Range: 25:1
Ratio: 25:1 Output shaft: Hollow Bore
Input Style: C-face Quill Output Shaft Orientation: H1
Output Shaft Assembly Code: H1 Gear Type: Worm
Service Factor: 1 Shaft Seal Material: Viton
Output RPM: 70 Model Code: HMQ826
Product Line: GR Series - Ironman Worm Gear Reducers No. of Gear Reductions: Single
Bore Code: 16 Mounting Style: Shaft Mount
Series: GR Series - Ironman Worm Gear Reducers Reducer: Worm - Right Angle
Housing material: Cast Iron Output HP: 2.076
Series Style: GR-HMQ-H1 Center distance (inch): 2.63
Frame Size: 56 Output Torque: 1869
Overhung Load: 1,625 Input HP: 2.487
Input Bore (C Face): 0.625 Assembly: HMQ-H1
Reducer Style: Worm - Right Angle Product Type: Right Angle
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.