Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-15-H1-56-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Nominal Motor HP Rating to HP @ 1750 RPM:||3||Series Code:||GR|
|Bore Code:||23||Output Key:||3/8 x 3.00|
|Input Style:||C-face Quill||Frame Size:||56|
|Output Shaft Orientation:||H1||Output Shaft Assembly Code:||H1|
|Series Style:||GR-HMQ-H1||Output Torque:||1737|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Input HP:||3.614|
|Output Style:||H1||Input RPM:||1,750|
|Mounting Style:||Shaft Mount||Keyway:||3/16 X 3/32|
|Output HP:||3.216||Output RPM:||116|
|Reducer Style:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|No. of Gear Reductions:||Single||Input Keyway:||3/16 X 1.63|
|Output Hollow Shaft Diameter (in):||1.438 in||Product Type:||Right Angle|
|Ratio:||15:1||Gear Drive Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Keyway (C Face):||3/16 x 3/32|
|Input Diameter (in):||0.625 in||Ratio Range:||15:1|
|Motor HP Rating:||3||Input Bore (C Face):||0.625|
|Shaft Seal Material:||Viton||Output shaft:||Hollow Bore|
|Model Code:||HMQ826||Housing material:||Cast Iron|
|Service Factor:||1||Input Quill Diameter (in):||0.625 in|
|Reducer:||Worm - Right Angle||Center distance (inch):||2.63|