Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ826-7.5-H1-56-20
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Style:||GR-HMQ-H1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Output RPM:||233.3|
|Mounting Style:||Shaft Mount||Product Type:||Right Angle|
|Input HP:||4.956||Housing material:||Cast Iron|
|Output Key:||1/4 X 2.50||Gear Type:||Worm|
|Output Hollow Shaft Diameter (in):||1.250 in||Shaft Seal Material:||Viton|
|Input Keyway (C Face):||3/16 x 3/32||Ratio Range:||7.5:1|
|Input Style:||C-face Quill||Output shaft:||Hollow Bore|
|Output Style:||H1||Output Shaft Orientation:||H1|
|Input RPM:||1,750||Input Bore (C Face):||0.625|
|Center distance (inch):||2.63||Ratio:||7.5:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Torque:||1235|
|Assembly:||HMQ-H1||No. of Gear Reductions:||Single|
|Input Diameter (in):||0.625 in||Gear Drive Reductions:||Single|
|Service Factor:||1||Output HP:||4.571|
|Reducer Style:||Worm - Right Angle||Bore Code:||20|
|Frame Size:||56||Output Shaft Assembly Code:||H1|