Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM826-5-H1-180-16
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Product Type:||Right Angle|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series Style:||GR-HM-H1||Model Code:||HM826|
|Gear Type:||Worm||Center distance (inch):||2.63|
|Reducer:||Worm - Right Angle||Ratio:||5:1|
|Shaft Seal Material:||Viton||Gear Drive Reductions:||Single|
|Ratio Range:||5:1||Input Keyway (C Face):||1/4 x 1/8|
|Output Torque:||1130||Input Bore (C Face):||1.125|
|Output Hollow Shaft Diameter (in):||1.000 in||Bore Code:||16|
|Input Style:||C-Face Coupled||Input RPM:||1,750|
|Input HP:||6.693||Output shaft:||Hollow Bore|
|Input Diameter (in):||1.125 in||Output Shaft Assembly Code:||H1|
|Output HP:||6.276||Mounting Style:||Shaft Mount|
|Output Style:||H1||Output Shaft Orientation:||H1|
|Output Key:||1/4 X 2.50||Frame Size:||180|
|Housing material:||Cast Iron||Service Factor:||1|
|Assembly:||HM-H1||No. of Gear Reductions:||Single|