Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM826-50-H1-56-20

Catalog #:GR-HM826-50-H1-56-20
Part #:GR8260521.20
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:56.00 LB
List Price: $1,700.00

General Specifications

UPC: 69031001633 Weight: 56.00 LB

Technical Specifications

Ratio Range: 50:1 Series: GR Series - Ironman Worm Gear Reducers
Product Type: Right Angle Gear Type: Worm
Reducer Style: Worm - Right Angle Input RPM: 1,750
Gear Drive Reductions: Single Mounting Style: Shaft Mount
Service Factor: 1 Frame Size: 56
Input Keyway (C Face): 3/16 x 3/32 Output Torque: 1843
Input Style: C-Face Coupled Center distance (inch): 2.63
Series Style: GR-HM-H1 Model Code: HM826
Output shaft: Hollow Bore No. of Gear Reductions: Single
Input Bore (C Face): 0.625 Output Style: H1
Product Line: GR Series - Ironman Worm Gear Reducers Output RPM: 35
Output Shaft Assembly Code: H1 Input HP: 1.42
Input Diameter (in): 0.625 in Reducer: Worm - Right Angle
Output Key: 1/4 X 2.50 Ratio: 50:1
Housing material: Cast Iron Output Shaft Orientation: H1
Output Hollow Shaft Diameter (in): 1.250 in Output HP: 1.023
Bore Code: 20 Assembly: HM-H1
Shaft Seal Material: Viton
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.