Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM826-40-H1-56-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output RPM:||43||Input RPM:||1,750|
|Series Code:||GR||Mounting Style:||Shaft Mount|
|Bore Code:||23||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Torque:||1854||Input HP:||1.695|
|Output HP:||1.287||Reducer Style:||Worm - Right Angle|
|Frame Size:||56||Series Style:||GR-HM-H1|
|Input Style:||C-Face Coupled||Output Style:||H1|
|Output Key:||3/8 x 3.00||Output Shaft Assembly Code:||H1|
|Output Shaft Orientation:||H1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Gear Drive Reductions:||Single||Series:||GR Series - Ironman Worm Gear Reducers|
|Ratio:||40:1||Input Bore (C Face):||0.625|
|Output shaft:||Hollow Bore||Gear Type:||Worm|
|No. of Gear Reductions:||Single||Input Keyway (C Face):||3/16 x 3/32|
|Service Factor:||1||Reducer:||Worm - Right Angle|
|Housing material:||Cast Iron||Input Keyway:||3/16x1.63|
|Input Diameter (in):||0.625 in||Center distance (inch):||2.63|
|Output Hollow Shaft Diameter (in):||1.438 in||Model Code:||HM826|
|Shaft Seal Material:||Viton||Ratio Range:||40:1|
|Assembly:||HM-H1||Product Type:||Right Angle|