Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H826-15-H1-23
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Diameter (in):||0.75 in||Input RPM:||1,750|
|Output Torque:||1737||Service Factor:||1|
|Reducer Style:||Worm - Right Angle||Output shaft:||Hollow Bore|
|Output Shaft Assembly Code:||H1||Gear Type:||Worm|
|Series:||GR Series - Ironman Worm Gear Reducers||Housing material:||Cast Iron|
|Ratio:||15:1||Output Hollow Shaft Diameter (in):||1.438 in|
|Product Type:||Right Angle||Center distance (inch):||2.63|
|Reducer:||Worm - Right Angle||Overhung Load:||1,625|
|Shaft Seal Material:||Viton||Bore Code:||23|
|Model Code:||H826||Gear Drive Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Style:||H1|
|Input Keyway:||3/16 x 1.63||Output Shaft Orientation:||H1|
|Ratio Range:||15:1||Series Style:||GR-H-H1|
|Input Style:||Shaft||No. of Gear Reductions:||Single|
|Input HP:||3.614||Output HP:||3.216|
|Output Key:||3/8 x 3.00||Mounting Style:||Shaft Mount|