Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H826-10-H1-23
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||Shaft||Product Line:||GR Series - Ironman Worm Gear Reducers|
|No. of Gear Reductions:||Single||Input Diameter (in):||0.75 in|
|Overhung Load:||1,625||Series Style:||GR-H-H1|
|Center distance (inch):||2.63||Input Keyway:||3/16 x 1.63|
|Reducer Style:||Worm - Right Angle||Product Type:||Right Angle|
|Gear Type:||Worm||Service Factor:||1|
|Output RPM:||175||Mounting Style:||Shaft Mount|
|Output Key:||3/8 x 3.00||Output Hollow Shaft Diameter (in):||1.438 in|
|Shaft Seal Material:||Viton||Output Shaft Orientation:||H1|
|Output Shaft Assembly Code:||H1||Housing material:||Cast Iron|
|Output shaft:||Hollow Bore||Assembly:||H-H1|
|Output Torque:||1475||Ratio Range:||10:1|
|Reducer:||Worm - Right Angle||Gear Drive Reductions:||Single|
|Output Style:||H1||Input RPM:||1,750|
|Series:||GR Series - Ironman Worm Gear Reducers||Output HP:||4.097|
|Model Code:||H826||Input HP:||4.492|