Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ824-5-H1-180-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||C-face Quill||Output Shaft Orientation:||H1|
|Nominal Motor HP Rating to HP @ 1750 RPM:||5||Keyway:||1/4 X 1/8|
|Output Shaft Assembly Code:||H1||Output Key:||3/8 x 3.00|
|Output HP:||4.985||Bore Code:||23|
|Reducer Style:||Worm - Right Angle||Frame Size:||180|
|Series Style:||GR-HMQ-H1||Input RPM:||1,750|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output RPM:||350|
|Output Torque:||898||Series Code:||GR|
|Mounting Style:||Shaft Mount||Output Style:||H1|
|Input HP:||5.323||Motor HP Rating:||5|
|Assembly:||HMQ-H1||Input Keyway:||3/16 X 1.63|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio:||5:1|
|Input Keyway (C Face):||1/4 x 1/8||Output Hollow Shaft Diameter (in):||1.438 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||1.125|
|Input Quill Diameter (in):||1.125 in||Output shaft:||Hollow Bore|
|Service Factor:||1||Center distance (inch):||2.38|
|Housing material:||Cast Iron||Gear Drive Reductions:||Single|
|No. of Gear Reductions:||Single||Input Diameter (in):||1.125 in|
|Shaft Seal Material:||Viton||Model Code:||HMQ824|
|Reducer:||Worm - Right Angle||Gear Type:||Worm|
|Product Type:||Right Angle||Ratio Range:||5:1|