Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ824-50-H1-140-23
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Bore Code:||23||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Center distance (inch):||2.38||Output Hollow Shaft Diameter (in):||1.438 in|
|Service Factor:||1||Output Torque:||1432|
|Ratio:||50:1||Output Key:||3/8 x 3.00|
|Input Style:||C-face Quill||Input RPM:||1,750|
|Input Bore (C Face):||0.875||Input Keyway (C Face):||3/16 x 3/32|
|Output shaft:||Hollow Bore||Series:||GR Series - Ironman Worm Gear Reducers|
|Series Style:||GR-HMQ-H1||Input Diameter (in):||0.875 in|
|Output Shaft Assembly Code:||H1||Ratio Range:||50:1|
|Input HP:||1.137||Product Type:||Right Angle|
|Output Shaft Orientation:||H1||Gear Type:||Worm|
|Output Style:||H1||Housing material:||Cast Iron|
|Mounting Style:||Shaft Mount||Overhung Load:||1,770|
|Reducer Style:||Worm - Right Angle||Reducer:||Worm - Right Angle|
|Shaft Seal Material:||Viton||Gear Drive Reductions:||Single|
|Output HP:||0.795||Model Code:||HMQ824|
|Output RPM:||35||No. of Gear Reductions:||Single|