Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ824-5-H1-140-20
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Style:||H1||Input RPM:||1,750|
|Housing material:||Cast Iron||Product Type:||Right Angle|
|Input Keyway (C Face):||3/16 x 3/32||Series:||GR Series - Ironman Worm Gear Reducers|
|Output Shaft Orientation:||H1||Bore Code:||20|
|Output Key:||1/4 X 2.50||Model Code:||HMQ824|
|Output shaft:||Hollow Bore||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||0.875||Gear Type:||Worm|
|Ratio:||5:1||No. of Gear Reductions:||Single|
|Output Torque:||898||Service Factor:||1|
|Series Style:||GR-HMQ-H1||Output RPM:||350|
|Output Shaft Assembly Code:||H1||Output Hollow Shaft Diameter (in):||1.250 in|
|Ratio Range:||5:1||Reducer Style:||Worm - Right Angle|
|Output HP:||4.985||Input Style:||C-face Quill|
|Frame Size:||140||Mounting Style:||Shaft Mount|
|Shaft Seal Material:||Viton||Gear Drive Reductions:||Single|
|Center distance (inch):||2.38||Input Diameter (in):||0.875 in|
|Reducer:||Worm - Right Angle|