Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ824-80-H1-56-19
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Type:||Cast Iron 800 Worm Gear Reducers||Series Code:||GR|
|Mounting Style:||Shaft Mount||Input HP:||0.455|
|Series Style:||GR-HMQ-H1||Output Key:||1/4 X 2.5|
|Input RPM:||1,750||Frame Size:||56|
|Output Shaft Orientation:||H1||Keyway:||3/16 X 3/32|
|Bore Code:||19||Output RPM:||21.9|
|Output HP:||0.288||Output Torque:||830|
|Input Style:||C-face Quill||Output Style:||H1|
|Reducer Style:||Worm - Right Angle||Output Shaft Assembly Code:||H1|
|Gear Drive Reductions:||Single||No. of Gear Reductions:||Single|
|Gear Type:||Worm||Shaft Seal Material:||Viton|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Quill Diameter (in):||0.625 in|
|Output Hollow Shaft Diameter (in):||1.188 in||Output shaft:||Hollow Bore|
|Input Bore (C Face):||0.625||Product Type:||Right Angle|
|Input Diameter (in):||0.625 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Service Factor:||1|
|Ratio:||80:1||Center distance (inch):||2.38|
|Housing material:||Cast Iron||Ratio Range:||80:1|
|Model Code:||HMQ824||Input Keyway (C Face):||3/16 x 3/32|