Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ824-50-H1-56-20
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Key:||1/4 X 2.50||Bore Code:||20|
|Series Style:||GR-HMQ-H1||Output Style:||H1|
|Input Style:||C-face Quill||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Series Code:||GR||Reducer Style:||Worm - Right Angle|
|Keyway:||3/16 X 3/32||Input RPM:||1,750|
|Output HP:||0.795||Output Shaft Orientation:||H1|
|Output RPM:||35||Input HP:||1.137|
|Output Shaft Assembly Code:||H1||Frame Size:||56|
|Output Torque:||1432||Mounting Style:||Shaft Mount|
|Model Code:||HMQ824||Product Type:||Right Angle|
|No. of Gear Reductions:||Single||Input Quill Diameter (in):||0.625 in|
|Input Bore (C Face):||0.625||Ratio Range:||50:1|
|Reducer:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Output shaft:||Hollow Bore||Housing material:||Cast Iron|
|Gear Type:||Worm||Gear Drive Reductions:||Single|
|Center distance (inch):||2.38||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Ratio:||50:1||Input Diameter (in):||0.625 in|
|Assembly:||HMQ-H1||Input Keyway (C Face):||3/16 x 3/32|
|Output Hollow Shaft Diameter (in):||1.250 in||Shaft Seal Material:||Viton|