Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM824-60-H1-180-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Center distance (inch):||2.38||Output RPM:||29|
|Output Shaft Orientation:||H1||Reducer Style:||Worm - Right Angle|
|Product Type:||Right Angle||Series Style:||GR-HM-H1|
|Service Factor:||1||Input Style:||C-Face Coupled|
|Gear Drive Reductions:||Single||Output Style:||H1|
|Ratio Range:||60:1||Reducer:||Worm - Right Angle|
|Frame Size:||180||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||1.125||Output Hollow Shaft Diameter (in):||1.438 in|
|Gear Type:||Worm||Shaft Seal Material:||Viton|
|Overhung Load:||1,770||Model Code:||HM824|
|Input Diameter (in):||1.125 in||Output Torque:||1418|
|Assembly:||HM-H1||Output shaft:||Hollow Bore|
|Output HP:||0.656||Input Keyway (C Face):||1/4 x 1/8|
|Input RPM:||1,750||Bore Code:||23|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input HP:||0.967|
|Mounting Style:||Shaft Mount||No. of Gear Reductions:||Single|
|Housing material:||Cast Iron||Output Key:||3/8 x 3.00|
|Ratio:||60:1||Output Shaft Assembly Code:||H1|