Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM824-30-H1-180-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Product Type:||Right Angle||Output Shaft Assembly Code:||H1|
|Output Torque:||1423||Output HP:||1.317|
|Output RPM:||58||Overhung Load:||1,770|
|Center distance (inch):||2.38||Series:||GR Series - Ironman Worm Gear Reducers|
|Housing material:||Cast Iron||Shaft Seal Material:||Viton|
|Gear Drive Reductions:||Single||Reducer Style:||Worm - Right Angle|
|Frame Size:||180||Input Bore (C Face):||1.125|
|Bore Code:||23||Mounting Style:||Shaft Mount|
|Output Key:||3/8 x 3.00||Input Keyway (C Face):||1/4 x 1/8|
|Series Style:||GR-HM-H1||No. of Gear Reductions:||Single|
|Input Diameter (in):||1.125 in||Output shaft:||Hollow Bore|
|Input RPM:||1,750||Output Style:||H1|
|Output Hollow Shaft Diameter (in):||1.438 in||Output Shaft Orientation:||H1|
|Input HP:||1.653||Model Code:||HM824|
|Reducer:||Worm - Right Angle||Gear Type:||Worm|
|Assembly:||HM-H1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Style:||C-Face Coupled||Service Factor:||1|