Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM824-30-H1-140-20
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Type:||Cast Iron 800 Worm Gear Reducers||Input RPM:||1,750|
|Input HP:||1.653||Output HP:||1.317|
|Series Code:||GR||Bore Code:||20|
|Output Shaft Assembly Code:||H1||Reducer Style:||Worm - Right Angle|
|Output Key:||1/4 X 2.50||Output Style:||H1|
|Input Style:||C-Face Coupled||Output Torque:||1423|
|Series Style:||GR-HM-H1||Output RPM:||58.3|
|Mounting Style:||Shaft Mount||Output Shaft Orientation:||H1|
|Frame Size:||140||No. of Gear Reductions:||Single|
|Ratio:||30:1||Gear Drive Reductions:||Single|
|Housing material:||Cast Iron||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||0.875||Ratio Range:||30:1|
|Model Code:||HM824||Service Factor:||1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Input Keyway:||3/16x1.63||Input Diameter (in):||0.875 in|
|Reducer:||Worm - Right Angle||Input Keyway (C Face):||3/16 x 3/32|
|Output Hollow Shaft Diameter (in):||1.250 in||Shaft Seal Material:||Viton|
|Output shaft:||Hollow Bore||Center distance (inch):||2.38|