Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM824-10-H1-140-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||C-Face Coupled||Output Shaft Assembly Code:||H1|
|Output RPM:||175||Output Style:||H1|
|Series Style:||GR-HM-H1||Output Key:||3/8 x 3.00|
|Output Torque:||1172||Input RPM:||1,750|
|Mounting Style:||Shaft Mount||Input HP:||3.564|
|Output Shaft Orientation:||H1||Output HP:||3.253|
|Reducer Style:||Worm - Right Angle||Frame Size:||140|
|Series Code:||GR||Bore Code:||23|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Center distance (inch):||2.38|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||10:1|
|No. of Gear Reductions:||Single||Shaft Seal Material:||Viton|
|Service Factor:||1||Input Bore (C Face):||0.875|
|Input Diameter (in):||0.875 in||Input Keyway:||3/16x1.63|
|Input Keyway (C Face):||3/16 x 3/32||Output shaft:||Hollow Bore|
|Product Type:||Right Angle||Model Code:||HM824|
|Gear Type:||Worm||Gear Drive Reductions:||Single|
|Reducer:||Worm - Right Angle||Assembly:||HM-H1|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Hollow Shaft Diameter (in):||1.438 in|
|Ratio:||10:1||Housing material:||Cast Iron|