Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM824-10-H1-140-16
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Overhung Load:||1,065||Bore Code:||16|
|Output Shaft Assembly Code:||H1||Nominal Motor HP Rating to HP @ 1750 RPM:||3|
|Output Style:||H1||Output Torque:||1172|
|Input RPM:||1,750||Output HP:||3.253|
|Output RPM:||175||Output Key:||1/4 X 3|
|Output Shaft Orientation:||H1||Reducer Style:||Worm - Right Angle|
|Frame Size:||140||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Series Code:||GR||Input Style:||C-Face Coupled|
|Mounting Style:||Shaft Mount||Series Style:||GR-HM-H1|
|Input HP:||3.564||Center distance (inch):||2.38|
|Input Bore (C Face):||0.875||Input Keyway (C Face):||3/16 x 3/32|
|Gear Type:||Worm||Model Code:||HM824|
|Gear Drive Reductions:||Single||Housing material:||Cast Iron|
|Service Factor:||1||Input Keyway:||3/16x1.63|
|Ratio Range:||10:1||Shaft Seal Material:||Viton|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Hollow Shaft Diameter (in):||1.000 in|
|Product Type:||Right Angle||Reducer:||Worm - Right Angle|
|No. of Gear Reductions:||Single||Output shaft:||Hollow Bore|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Diameter (in):||0.875 in|
|Ratio:||10:1||Motor HP Rating:||3|