Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM824-80-H1-56-20
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Style:||GR-HM-H1||Input RPM:||1,750|
|Series Code:||GR||Output Style:||H1|
|Output Shaft Orientation:||H1||Frame Size:||56|
|Input Style:||C-Face Coupled||Output Key:||1/4 X 2.50|
|Reducer Style:||Worm - Right Angle||Output HP:||0.288|
|Input HP:||0.455||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output RPM:||21.9||Output Torque:||830|
|Mounting Style:||Shaft Mount||Output Shaft Assembly Code:||H1|
|Bore Code:||20||Shaft Seal Material:||Viton|
|Center distance (inch):||2.38||Gear Type:||Worm|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Hollow Shaft Diameter (in):||1.250 in|
|No. of Gear Reductions:||Single||Reducer:||Worm - Right Angle|
|Product Type:||Right Angle||Service Factor:||1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||0.625|
|Input Keyway (C Face):||3/16 x 3/32||Ratio Range:||80:1|
|Model Code:||HM824||Input Keyway:||3/16x1.63|
|Housing material:||Cast Iron||Gear Drive Reductions:||Single|
|Output shaft:||Hollow Bore||Input Diameter (in):||0.625 in|