Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H824-80-H1-23
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Style:||GR-H-H1||Output Shaft Orientation:||H1|
|Input HP:||0.455||Output Key:||3/8 x 3.00|
|Output Style:||H1||Input RPM:||1,750|
|Mounting Style:||Shaft Mount||Output RPM:||21.9|
|Output Shaft Assembly Code:||H1||Bore Code:||23|
|Output Torque:||830||Input Style:||Shaft|
|Series Code:||GR||Output HP:||0.288|
|Reducer Style:||Worm - Right Angle||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Shaft Seal Material:||Viton||Input Diameter (in):||0.75 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Hollow Shaft Diameter (in):||1.438 in|
|Ratio Range:||80:1||Input Keyway:||3/16 x 1.63|
|Gear Drive Reductions:||Single||Housing material:||Cast Iron|
|Product Type:||Right Angle||Gear Type:||Worm|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Reducer:||Worm - Right Angle|
|Center distance (inch):||2.38||Model Code:||H824|
|Output shaft:||Hollow Bore||Assembly:||H-H1|
|No. of Gear Reductions:||Single|