Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-10-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input HP:||3.564||No. of Gear Reductions:||Single|
|Frame Size:||180||Reducer Style:||Worm - Right Angle|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output HP:||3.253|
|Input RPM:||1,750||Series Style:||GR-BMQ-L|
|Output Key:||1/4 X 1.75||Output Torque:||1172|
|Output RPM:||175||Keyway:||1/4 x 1/8|
|Output Shaft Assembly Code:||L||Input Style:||C-face Quill|
|Series Code:||GR||Overhung Load:||1,770|
|Output Shaft Orientation:||L||Output Style:||L|
|Mounting Style:||Base||Input Keyway (C Face):||1/4 x 1/8|
|Input Quill Diameter (in):||1.125 in||Ratio:||10:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||10:1|
|Product Type:||Right Angle||Reducer:||Worm - Right Angle|
|Input Diameter (in):||1.125 in||Service Factor:||1|
|Gear Type:||Worm||Shaft Seal Material:||Viton|
|Gear Drive Reductions:||Single||Housing material:||Cast Iron|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Model Code:||BMQ824|
|Center distance (inch):||2.38||Output Diameter (in):||1.125 in|
|Input Bore (C Face):||1.125|