Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-7.5-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Frame Size:||180||Output RPM:||233.3|
|Mounting Style:||Base||Output Style:||L|
|Series Style:||GR-BMQ-L||Reducer Style:||Worm - Right Angle|
|Series Code:||GR||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Input Style:||C-face Quill||Output HP:||3.685|
|Overhung Load:||1,770||Keyway:||1/4 x 1/8|
|Output Shaft Orientation:||L||Input RPM:||1,750|
|Output Key:||1/4 X 1.75||No. of Gear Reductions:||Single|
|Input HP:||3.992||Output Torque:||995|
|Output Shaft Assembly Code:||L||Ratio:||7.5:1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Center distance (inch):||2.38|
|Product Type:||Right Angle||Input Quill Diameter (in):||1.125 in|
|Output Diameter (in):||1.125 in||Housing material:||Cast Iron|
|Gear Drive Reductions:||Single||Series:||GR Series - Ironman Worm Gear Reducers|
|Output shaft:||Shaft||Service Factor:||1|
|Ratio Range:||7.5:1||Input Diameter (in):||1.125 in|
|Input Keyway (C Face):||1/4 x 1/8||Reducer:||Worm - Right Angle|
|Shaft Seal Material:||Viton||Model Code:||BMQ824|
|Input Bore (C Face):||1.125|