Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-5-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|No. of Gear Reductions:||Single||Series Style:||GR-BMQ-L|
|Overhung Load:||1,770||Output HP:||4.985|
|Output Key:||1/4 X 1.75||Reducer Style:||Worm - Right Angle|
|Keyway:||1/4 x 1/8||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Input RPM:||1,750||Output Torque:||898|
|Input Style:||C-face Quill||Frame Size:||180|
|Input HP:||5.323||Output Style:||L|
|Output Shaft Orientation:||L||Output Shaft Assembly Code:||L|
|Series Code:||GR||Mounting Style:||Base|
|Output RPM:||350||Input Bore (C Face):||1.125|
|Model Code:||BMQ824||Gear Type:||Worm|
|Input Diameter (in):||1.125 in||Reducer:||Worm - Right Angle|
|Housing material:||Cast Iron||Center distance (inch):||2.38|
|Assembly:||BMQ-L||Shaft Seal Material:||Viton|
|Ratio:||5:1||Input Keyway (C Face):||1/4 x 1/8|
|Output shaft:||Shaft||Product Type:||Right Angle|
|Input Quill Diameter (in):||1.125 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Gear Drive Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||5:1|
|Output Diameter (in):||1.125 in|