Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-25-D-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|No. of Gear Reductions:||Single||Mounting Style:||Base|
|Output Shaft Orientation:||D||Input Style:||C-face Quill|
|Model Code:||BMQ824||Output Torque:||1454|
|Input HP:||1.967||Product Type:||Right Angle|
|Output Key:||1/4 x 1.75||Ratio Range:||25:1|
|Center distance (inch):||2.38||Service Factor:||1|
|Series Style:||GR-BMQ-D||Gear Drive Reductions:||Single|
|Frame Size:||140||Input Bore (C Face):||0.875|
|Input Diameter (in):||0.875 in||Reducer Style:||Worm - Right Angle|
|Overhung Load:||1,770||Input Keyway (C Face):||3/16 x 3/32|
|Output Style:||D||Output shaft:||Shaft|
|Assembly:||BMQ-D||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Housing material:||Cast Iron||Series:||GR Series - Ironman Worm Gear Reducers|
|Shaft Seal Material:||Viton||Output Diameter (in):||1.125 in|
|Input RPM:||1,750||Gear Type:||Worm|
|Output RPM:||70||Output Shaft Assembly Code:||D|
|Reducer:||Worm - Right Angle|