Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-7.5-R-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Key:||1/4 X 1.75||Output Torque:||995|
|Frame Size:||140||Output Shaft Assembly Code:||R|
|Reducer Style:||Worm - Right Angle||Keyway:||3/16 X 3/32|
|Output HP:||3.685||Series Style:||GR-BMQ-R|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Shaft Orientation:||R|
|No. of Gear Reductions:||Single||Input Style:||C-face Quill|
|Output RPM:||233.3||Output Style:||R|
|Mounting Style:||Base||Input RPM:||1,750|
|Input HP:||3.992||Series Code:||GR|
|Overhung Load:||1,770||Service Factor:||1|
|Series:||GR Series - Ironman Worm Gear Reducers||Assembly:||BMQ-R|
|Center distance (inch):||2.38||Input Diameter (in):||0.875 in|
|Model Code:||BMQ824||Ratio Range:||7.5:1|
|Gear Type:||Worm||Housing material:||Cast Iron|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Diameter (in):||1.125 in|
|Reducer:||Worm - Right Angle||Ratio:||7.5:1|
|Shaft Seal Material:||Viton||Output shaft:||Shaft|
|Product Type:||Right Angle||Gear Drive Reductions:||Single|
|Input Quill Diameter (in):||0.875 in||Input Keyway (C Face):||3/16 x 3/32|
|Input Bore (C Face):||0.875|