Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-50-L-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Ratio:||50:1||Center distance (inch):||2.38|
|Model Code:||BMQ824||Input Diameter (in):||0.875 in|
|Gear Drive Reductions:||Single||Input HP:||1.137|
|Product Type:||Right Angle||Ratio Range:||50:1|
|Output HP:||0.795||Output Torque:||1432|
|Output Shaft Assembly Code:||L||Output Style:||L|
|No. of Gear Reductions:||Single||Service Factor:||1|
|Input Keyway (C Face):||3/16 x 3/32||Series:||GR Series - Ironman Worm Gear Reducers|
|Input RPM:||1,750||Mounting Style:||Base|
|Series Style:||GR-BMQ-L||Input Bore (C Face):||0.875|
|Housing material:||Cast Iron||Assembly:||BMQ-L|
|Input Style:||C-face Quill||Reducer Style:||Worm - Right Angle|
|Output Shaft Orientation:||L||Frame Size:||140|
|Reducer:||Worm - Right Angle||Shaft Seal Material:||Viton|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Gear Type:||Worm|
|Output Diameter (in):||1.125 in||Output shaft:||Shaft|
|Output RPM:||35||Overhung Load:||1,770|
|Output Key:||1/4 x 1.75|