Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-40-L-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Style:||L||Output Shaft Assembly Code:||L|
|Input RPM:||1,750||Output Torque:||1433|
|Output Shaft Orientation:||L||Mounting Style:||Base|
|Overhung Load:||1,770||Output Key:||1/4 X 1.75|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Series Style:||GR-BMQ-L|
|No. of Gear Reductions:||Single||Reducer Style:||Worm - Right Angle|
|Input HP:||1.342||Output HP:||0.994|
|Output RPM:||43||Keyway:||3/16 X 3/32|
|Input Style:||C-face Quill||Frame Size:||140|
|Series Code:||GR||Housing material:||Cast Iron|
|Model Code:||BMQ824||Shaft Seal Material:||Viton|
|Product Type:||Right Angle||Output shaft:||Shaft|
|Output Diameter (in):||1.125 in||Input Keyway (C Face):||3/16 x 3/32|
|Ratio Range:||40:1||Input Quill Diameter (in):||0.875 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||0.875|
|Input Diameter (in):||0.875 in||Gear Type:||Worm|
|Service Factor:||1||Center distance (inch):||2.38|
|Gear Drive Reductions:||Single||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle|