Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-7.5-L-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Style:||GR-BMQ-L||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer Style:||Worm - Right Angle||Output Diameter (in):||1.125 in|
|Output Torque:||995||Input Keyway (C Face):||3/16 x 3/32|
|Product Type:||Right Angle||Service Factor:||1|
|Housing material:||Cast Iron||Input Style:||C-face Quill|
|Input HP:||3.992||Frame Size:||140|
|Gear Type:||Worm||No. of Gear Reductions:||Single|
|Output shaft:||Shaft||Output Key:||1/4 x 1.75|
|Reducer:||Worm - Right Angle||Center distance (inch):||2.38|
|Output Shaft Orientation:||L||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||0.875||Output Style:||L|
|Output Shaft Assembly Code:||L||Output HP:||3.685|
|Assembly:||BMQ-L||Gear Drive Reductions:||Single|
|Mounting Style:||Base||Ratio Range:||7.5:1|
|Input Diameter (in):||0.875 in||Output RPM:||233.3|
|Shaft Seal Material:||Viton||Model Code:||BMQ824|