Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-5-D-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Keyway:||3/16 X 3/32|
|Output Key:||1/4 X 1.75||Frame Size:||56|
|Overhung Load:||1,770||Output Shaft Assembly Code:||D|
|Input RPM:||1,750||Input HP:||5.323|
|Output HP:||4.985||Output Shaft Orientation:||D|
|Input Style:||C-face Quill||No. of Gear Reductions:||Single|
|Series Code:||GR||Series Style:||GR-BMQ-D|
|Output Style:||D||Output RPM:||350|
|Output Torque:||898||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Mounting Style:||Base||Shaft Seal Material:||Viton|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Reducer:||Worm - Right Angle|
|Gear Drive Reductions:||Single||Output shaft:||Shaft|
|Ratio Range:||5:1||Gear Type:||Worm|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Diameter (in):||1.125 in|
|Housing material:||Cast Iron||Model Code:||BMQ824|
|Product Type:||Right Angle||Input Bore (C Face):||0.625|
|Service Factor:||1||Input Keyway (C Face):||3/16 x 3/32|
|Input Diameter (in):||0.625 in||Ratio:||5:1|
|Assembly:||BMQ-D||Center distance (inch):||2.38|
|Input Quill Diameter (in):||0.625 in|