Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-25-R-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Torque:||1454||Series Style:||GR-BMQ-R|
|Keyway:||3/16 X 3/32||Mounting Style:||Base|
|Input RPM:||1,750||Input Style:||C-face Quill|
|Overhung Load:||1,770||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Style:||R||Reducer Style:||Worm - Right Angle|
|Input HP:||1.967||Output Shaft Orientation:||R|
|Output Key:||1/4 X 1.75||Output Shaft Assembly Code:||R|
|Output RPM:||70||Series Code:||GR|
|Output HP:||1.615||Frame Size:||56|
|No. of Gear Reductions:||Single||Output shaft:||Shaft|
|Ratio Range:||25:1||Gear Type:||Worm|
|Product Type:||Right Angle||Input Bore (C Face):||0.625|
|Ratio:||25:1||Reducer:||Worm - Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Model Code:||BMQ824|
|Input Quill Diameter (in):||0.625 in||Housing material:||Cast Iron|
|Service Factor:||1||Gear Drive Reductions:||Single|
|Series:||GR Series - Ironman Worm Gear Reducers||Shaft Seal Material:||Viton|
|Input Keyway (C Face):||3/16 x 3/32||Center distance (inch):||2.38|
|Assembly:||BMQ-R||Output Diameter (in):||1.125 in|
|Input Diameter (in):||0.625 in|