Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-15-L-56
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Key:||1/4 X 1.75||Keyway:||3/16 X 3/32|
|Input Style:||C-face Quill||Frame Size:||56|
|No. of Gear Reductions:||Single||Overhung Load:||1,770|
|Series Style:||GR-BMQ-L||Series Code:||GR|
|Output HP:||2.439||Output Style:||L|
|Input HP:||2.765||Output Torque:||1318|
|Output RPM:||116||Reducer Style:||Worm - Right Angle|
|Input RPM:||1,750||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Shaft Orientation:||L||Mounting Style:||Base|
|Output Shaft Assembly Code:||L||Center distance (inch):||2.38|
|Gear Drive Reductions:||Single||Input Keyway (C Face):||3/16 x 3/32|
|Ratio:||15:1||Reducer:||Worm - Right Angle|
|Input Diameter (in):||0.625 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Gear Type:||Worm||Service Factor:||1|
|Input Quill Diameter (in):||0.625 in||Ratio Range:||15:1|
|Model Code:||BMQ824||Housing material:||Cast Iron|
|Output shaft:||Shaft||Input Bore (C Face):||0.625|
|Assembly:||BMQ-L||Output Diameter (in):||1.125 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Shaft Seal Material:||Viton|