Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM824-50-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input RPM:||1,750||No. of Gear Reductions:||Single|
|Mounting Style:||Base||Gear Drive Reductions:||Single|
|Center distance (inch):||2.38||Output HP:||0.795|
|Model Code:||BM824||Output Torque:||1432|
|Housing material:||Cast Iron||Assembly:||BM-L|
|Input Diameter (in):||1.125 in||Input Style:||C-Face Coupled|
|Shaft Seal Material:||Viton||Input Bore (C Face):||1.125|
|Series:||GR Series - Ironman Worm Gear Reducers||Service Factor:||1|
|Ratio Range:||50:1||Product Type:||Right Angle|
|Ratio:||50:1||Reducer:||Worm - Right Angle|
|Gear Type:||Worm||Input Keyway (C Face):||1/4 x 1/8|
|Reducer Style:||Worm - Right Angle||Output Style:||L|
|Series Style:||GR-BM-L||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Frame Size:||180||Overhung Load:||1,770|
|Output shaft:||Shaft||Input HP:||1.137|
|Output RPM:||35||Output Key:||1/4 x 1.75|
|Output Shaft Orientation:||L||Output Diameter (in):||1.125 in|
|Output Shaft Assembly Code:||L|