Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM824-5-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Product Type:||Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series Style:||GR-BM-L||Model Code:||BM824|
|Gear Type:||Worm||Center distance (inch):||2.38|
|Reducer:||Worm - Right Angle||Ratio:||5:1|
|Overhung Load:||1,770||Input Bore (C Face):||1.125|
|Output Diameter (in):||1.125 in||Ratio Range:||5:1|
|Output Shaft Orientation:||L||Output Key:||1/4 x 1.75|
|Gear Drive Reductions:||Single||Frame Size:||180|
|Output Shaft Assembly Code:||L||Output RPM:||350|
|Output shaft:||Shaft||No. of Gear Reductions:||Single|
|Input HP:||5.323||Shaft Seal Material:||Viton|
|Output Style:||L||Mounting Style:||Base|
|Assembly:||BM-L||Input Style:||C-Face Coupled|
|Service Factor:||1||Output Torque:||898|
|Input Keyway (C Face):||1/4 x 1/8||Input Diameter (in):||1.125 in|
|Output HP:||4.985||Input RPM:||1,750|
|Housing material:||Cast Iron|