Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM824-10-L-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||10.69||Packaged Width:||9.06|
|Overhung Load:||1,770||Keyway:||3/16 X 3/32|
|Series Style:||GR-BM-L||Output Shaft Assembly Code:||L|
|Reducer Style:||Worm - Right Angle||Output Torque:||1172|
|Output Key:||1/4 X 1.75||Input HP:||3.564|
|Output HP:||3.253||Input Style:||C-Face Coupled|
|Output Style:||L||Mounting Style:||Base|
|Output Shaft Orientation:||L||Input RPM:||1,750|
|Output RPM:||175||No. of Gear Reductions:||Single|
|Frame Size:||140||Series Code:||GR|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Service Factor:||1|
|Output shaft:||Shaft||Model Code:||BM824|
|Housing material:||Cast Iron||Ratio Range:||10:1|
|Gear Drive Reductions:||Single||Center distance (inch):||2.38|
|Reducer:||Worm - Right Angle||Product Type:||Right Angle|
|Ratio:||10:1||Output Diameter (in):||1.125 in|
|Input Bore (C Face):||0.875||Gear Type:||Worm|
|Assembly:||BM-L||Input Keyway:||3/16 X 1.63|
|Shaft Seal Material:||Viton||Input Keyway (C Face):||3/16 x 3/32|
|Input Diameter (in):||0.875 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Series:||GR Series - Ironman Worm Gear Reducers|