Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM824-15-D-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Model Code:||BM824||Reducer Style:||Worm - Right Angle|
|Output RPM:||116||Output Shaft Assembly Code:||D|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Series Style:||GR-BM-D|
|Ratio:||15:1||Output Shaft Orientation:||D|
|Gear Drive Reductions:||Single||No. of Gear Reductions:||Single|
|Frame Size:||56||Service Factor:||1|
|Series:||GR Series - Ironman Worm Gear Reducers||Assembly:||BM-D|
|Input Diameter (in):||0.625 in||Input Bore (C Face):||0.625|
|Reducer:||Worm - Right Angle||Mounting Style:||Base|
|Shaft Seal Material:||Viton||Input RPM:||1,750|
|Product Type:||Right Angle||Overhung Load:||1,770|
|Ratio Range:||15:1||Input HP:||2.765|
|Input Keyway (C Face):||3/16 x 3/32||Output HP:||2.439|
|Output Diameter (in):||1.125 in||Center distance (inch):||2.38|
|Output shaft:||Shaft||Output Style:||D|
|Output Key:||1/4 x 1.75||Input Style:||C-Face Coupled|
|Output Torque:||1318||Gear Type:||Worm|
|Housing material:||Cast Iron|