Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM824-7.5-R-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Style:||GR-BM-R||Output HP:||3.685|
|Center distance (inch):||2.38||Output Shaft Orientation:||R|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||7.5:1|
|Shaft Seal Material:||Viton||Ratio:||7.5:1|
|Output RPM:||233.3||Product Type:||Right Angle|
|Mounting Style:||Base||Input RPM:||1,750|
|Output Torque:||995||Output Key:||1/4 x 1.75|
|Series:||GR Series - Ironman Worm Gear Reducers||Service Factor:||1|
|Input Diameter (in):||0.625 in||Input Style:||C-Face Coupled|
|Overhung Load:||1,770||Frame Size:||56|
|Reducer Style:||Worm - Right Angle||Reducer:||Worm - Right Angle|
|Input HP:||3.992||Output Style:||R|
|Output shaft:||Shaft||Housing material:||Cast Iron|
|Gear Drive Reductions:||Single||No. of Gear Reductions:||Single|
|Output Shaft Assembly Code:||R||Input Bore (C Face):||0.625|
|Input Keyway (C Face):||3/16 x 3/32||Gear Type:||Worm|
|Output Diameter (in):||1.125 in||Assembly:||BM-R|