Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B824-20-D
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||10.69 Inches||Packaged Width:||9.06 Inches|
|Packaged Height:||10.5 Inches|
|Output Torque:||1421||Output Shaft Orientation:||D|
|Output RPM:||87||Input RPM:||1,750|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Overhung Load:||1,770|
|Input HP:||2.326||Output Key:||1/4 X 1.75|
|Input Style:||Shaft||Output Style:||D|
|Mounting Style:||Base||Reducer Style:||Worm - Right Angle|
|Series Code:||GR||Output HP:||1.972|
|Series Style:||GR-B-D||Output Shaft Assembly Code:||D|
|No. of Gear Reductions:||Single||Housing material:||Cast Iron|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Gear Drive Reductions:||Single|
|Shaft Seal Material:||Viton||Input Keyway:||3/16 x 1.63|
|Model Code:||B824||Gear Type:||Worm|
|Output Diameter (in):||1.125 in||Ratio Range:||20:1|
|Input Diameter (in):||0.75 in||Reducer:||Worm - Right Angle|
|Center distance (inch):||2.38|