Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B824-100-L
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||10.69 Inches||Packaged Width:||9.06 Inches|
|Packaged Height:||10.5 Inches|
|Input HP:||0.307||Output Shaft Orientation:||L|
|Output Shaft Assembly Code:||L||Series Style:||GR-B-L|
|Output Style:||L||No. of Gear Reductions:||Single|
|Keyway:||3/16 X 3/32||Output HP:||0.18|
|Input RPM:||1,750||Output Torque:||648|
|Output Key:||1/4 X 1.75||Reducer Style:||Worm - Right Angle|
|Output RPM:||17||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Series Code:||GR||Overhung Load:||1,770|
|Mounting Style:||No Base||Input Style:||Shaft|
|Ratio Range:||100:1 to 250:1||Gear Type:||Worm|
|Product Type:||Right Angle||Center distance (inch):||2.38|
|Input Keyway:||3/16 x 1.63||Service Factor:||1|
|Output Diameter (in):||1.125 in||Reducer:||Worm - Right Angle|
|Shaft Seal Material:||Viton||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Ratio:||100:1||Gear Drive Reductions:||Single|
|Input Diameter (in):||0.75 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||B824||Housing material:||Cast Iron|