Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H818-50-H1-16
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Type:||Cast Iron 800 Worm Gear Reducers||Series Code:||GR|
|Input RPM:||1,750||Output Torque:||634|
|Output Key:||1/4 X 2.5||Output Style:||H1|
|Output Shaft Orientation:||H1||Input HP:||0.515|
|Output Shaft Assembly Code:||H1||Reducer Style:||Worm - Right Angle|
|Series Style:||GR-H-H1||Mounting Style:||Shaft Mount|
|Output RPM:||35||Input Style:||Shaft|
|Bore Code:||16||Output HP:||0.352|
|Output Hollow Shaft Diameter (in):||1.000 in||Center distance (inch):||1.75|
|Gear Type:||Worm||Gear Drive Reductions:||Single|
|Housing material:||Cast Iron||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Keyway:||3/16 X 1.38||Product Type:||Right Angle|
|Reducer:||Worm - Right Angle||No. of Gear Reductions:||Single|
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio:||50:1|
|Output shaft:||Hollow Bore||Input Diameter (in):||0.625 in|
|Model Code:||H818||Service Factor:||1|
|Ratio Range:||50:1||Shaft Seal Material:||Viton|